How To Remove Dust From The Air After Construction?
Contain the Construction Area
Containing the renovation area well is one of the best ways through which one can prevent construction dust from spreading. Seal off the work area by separating it from the rest of the building using plastic barriers or zipper door systems. This will help contain the dust particles from infiltrating into other rooms and traveling through the HVAC ducts.
Run air purifiers and scrubbers
These dust-cleaning machines, otherwise referred to as air purifiers, air scrubbers, and blowers, are set up to draw in air full of dust, capture the particles in HEPA filters, and recirculate clean, fresh air into the space. Set up purifiers in a completely closed-off construction zone and in the living space adjacent to it for thorough dust removal. Look for units with true HEPA filters that remove at least 99.97% of airborne particles 0.3 microns or greater. Consider more robust options, such as the Blueair Pro series, for high CADR while running very quietly.
Vacuum and Wipe Surfaces Frequently
Vacuuming is important for removing dust that has settled onto the floors and other surfaces. First, get out a good vacuum with a HEPA filter and, while vacuuming, hit any carpets, upholstery, and soft furnishings several times. One of the more effective dust-catchers, a HEPA filter catches small particles and allergens so that your dust doesn't get redistributed into the air but is actually eliminated from your home. When dusting any hard surface, from walls to moldings to counters, always start high to work low. This prevents dust from resettling onto your clean areas. Dry dusting is recommended to avoid damaging finishes, but a slightly damp microfiber cloth is very effective—just test it first to make sure it won't harm the finish. Microfiber cloths are really good at catching dust, and most of the time, they can be used just on their own, which is very environmentally friendly. Easy places to overlook often include ceiling fans, light fixtures, and knick-knacks. These tend to catch a lot of dust and usually go unnoticed when simple cleaning is done. For a comprehensive deep cleaning service, consider contacting Sparkly Maid Miami. Also, change your vacuum filters often and clean dusting cloths for them to work effectively and efficiently. This way, thorough and periodic dusting would provide a much cleaner environment that helps in improving indoor air quality and reducing allergens for a fit life.
Clean or Replace HVAC Filters
Much of the construction dust will fall inside the HVAC vents and ducts. To prevent it from becoming re-entrained into the air stream, seal plastic bags over the air vents in the renovation area with tape, then close them during the renovation project. Following project completion, remove all these vent covers and clean them with soap and water. Replace the air filters with good ones, and ensure that the duct cleaning is done by an expert. This is an important step in preventing the dust from spreading into the whole building. For a thorough and professional cleaning, consider scheduling a post construction cleaning, to address all the hidden dust and debris effectively.
Use Negative Air Pressure
Otherwise, negative air pressure will mean that air gets sipped into this area rather than allowing any dust to propagate out into the rest of the facility. This is accomplished by installing fans and blowers, which draw the air into the construction zone in such a manner that there is pressure heterogeneousness between the renovation space and the rooms adjacent to it. Another, more professional-grade fan is the Dantherm DF 20; it's an even more heavy-duty model still capable of effective air circulation but ready and able to take the pounding and rigors of the construction site.
Dampen Dust at the Source
In addition to air filtration, dampening can reduce the quantity of dust becoming airborne to begin with. Use a light water mist to dampen the generation of dust clouds. Avoid dry sweeping or wiping up dust: it will simply stir the particles into the air again. Instead, use damp cloths or mops to trap and remove dust.
Choose Low-VOC Materials
Many construction and renovation materials are sources of volatile organic compounds, emitted as gases into the air. Several health complications can be triggered off by exposure to fumes of VOCs; some of these complications are quite serious. Where possible, opt for products that are labeled low- or zero-VOC and avoid high-emitting materials like oil-based paints. Where possible, use low or no-VOC products; avoid high-VOC ones, such as oil-based paints. Ensure good ventilation during and after application of any chemicals, paints, adhesives, etc.
While constructing or renovating, extensive cleaning and proper air purification equipment ensure that the air does not turn into a health hazard. Proper cleaning, combined with suitable filtration solutions, can keep hazardous dust at bay and make breathing easy in the newly renovated space. For comprehensive cleaning services that guarantee a safe and healthy environment, consider reaching out to Deep Cleaning Seattle.
